Call Us: (888) 610-1760
 
Related Products
From: $237.69
Fujita Cold Air Intake Cobalt 05-09

  
Injen Cold Air Intake
Injen Cold Air Intake
From: $250.05
 
Weaponr Dragon Intake Chevy Cobalt SS 05-07
Weaponr Dragon Intake Chevy Cobalt SS 05-07
From: $177.65
 
WeaponR Secret Weapon Air Intake Chevy Cobalt 05-09
WeaponR Secret Weapon Air Intake Chevy Cobalt 05-09
From: $220.15
 
AEM Cold Air Intake Chevy Cobalt 05-10
AEM Cold Air Intake Chevy Cobalt 05-10
From: $204.99
 
KN Series 69 Typhoon Cold Air Intake
KN Series 69 Typhoon Cold Air Intake
From: $231.50
 
Takeda Cold Air Intake Chevy Cobalt SS/SC 05-07
Takeda Cold Air Intake Chevy Cobalt SS/SC 05-07
From: $229.00
 
DC Sports Cold Air Intake Chevy Cobalt 05-08
DC Sports Cold Air Intake Chevy Cobalt 05-08
From: $165.99
 

Fujita Cold Air Intake Chevy Cobalt 05-09.

Increase your Cobalt's power and performance with the addition of a Cold Air Intakes System.

Aftermarket intake systems perform a vital role in the performance of your Chevy Cobalt.   An aftermarket intake system replaces the restrictive factory filter and intake housing that is located in your engine compartment.  

A aftermarket cold air intake system relocates the filter outside the engine compartment where it can deliver cooler air to the combustion chamber.  The introduction of cooler denser oxygen by the system provides for a more intense explosion in the chamber which increases horsepower and torque.  Now take that free flowing mandrel bent inlet tube and tune it in length and diameter to match the engine.  The result is more oxygen moving to the cylinders which creates maximum power gains for your Chevy Cobalt.   

Most cold air induction systems are C.A.R.B. approved.  C.A.R.B. E.O. is the California Air Resources Board Executive Order that exempts them from the prohibitions of the California Vehicle Code (CVC) 27165 which states that you cannot modify your car in the area of emission control system.  If there is a C.A.R.B.E.O. number it exempts the cold air intake system and allows you to legally install it on your automobile.

This cold intake systems are made with 6061 T6 Aluminum Alloy and polished to an extremely bright finish.  Carbon Plated T-bolt Clamps are used due to their strength and reliability. T-bolt Clamps either meet or exceed the SAE Spec. J1508.  CNC machined air mass sensor fittings are used to ensure proper cold air/fuel ratios.  Sensors are engineered for accuracy.  Reinforced Silicone Hose are used to provide stability during both extreme hot and cold conditions, -65°F(-54°C) to +500°F (+260°C).  The  Intake Systems come with a Super Flow High Performance Air Filter? designed to maximize efficiency without compensating air filtration.

Don't hesitate any longer, install a one of these Cold Air Intake Systems and experience first hand what improved power and torque feel like.

Fujita CA-1415 Chevy Cobalt 2.2L 05-09

Fujita CA-1416Chevy Cobalt SS/SC 05-06

  • Made with 6061 T6 Aluminum Alloy
  • Carbon Plated T-Bolt Clamps
  • CNC Machined Air Mass Sensor Fittings
  • Reinforced Silicone Hose
  • Fujita Cold Air Intake
  • Intake, Intake, Intake, Intake, Intake