Call Us: (888) 610-1760

  
KSport GTPro Coilovers System Chevy Cobalt 05-10
KSport GTPro Coilovers System Chevy Cobalt 05-10
From: $1,313.00
 
Ksport KontrolPro Coilovers
Ksport KontrolPro Coilovers
From: $942.50
 
Ksport GT Lowering Springs Chevy Cobalt 05-10
Ksport GT Lowering Springs Chevy Cobalt 05-10
From: $156.00
 
Eibach Sportline Lowering Springs Chevy Cobalt 05-10
Eibach Sportline Lowering Springs Chevy Cobalt 05-10
From: $231.95
 
Eibach Pro Kit Suspension Lowering Springs
Eibach Pro Kit Suspension Lowering Springs
From: $219.71
 
Eibach Front Anti Sway Bar
Eibach Front Anti Sway Bar
From: $169.47
 
Eibach Anti Roll Bar Rear
Eibach Anti Roll Bar Rear
From: $238.77
 
Eibach Anti Roll Bars Kit
Eibach Anti Roll Bars Kit
From: $371.07
 
DC Sports Front Strut Bar Chevy Cobalt 05-08
DC Sports Front Strut Bar Chevy Cobalt 05-08
From: $99.99
 
BG S2 Sport Lowering Springs
BG S2 Sport Lowering Springs
From: $200.85
 
BG RS2 Coilovers Chevy Cobalt 05-09
BG RS2 Coilovers Chevy Cobalt 05-09
From: $1,392.00
 
Megan Racing Coilover Damper 06-09 Cobalt SS
Megan Racing Coilover Damper 06-09 Cobalt SS
From: $925.00
 

Performance Suspension Coilover Ksport VersionRR Damper System for Chevrolet Cobalt 05 and up prt  CCV04-RR

Ksport products have been proven both on and off the track worldwide.  Need a damper system for road racing, look no farther the VersionRR Damper System is built specifically for road racing.  

Choose aggressive rates and valving for maximum handling and performance is easy.  With 36 levels of dampening adjustment, simultaneous compression and rebound adjustment, lightweight aluminum mounts, and pillow ball upper mounts on some applications the VersionRR is road race ready. FOR RACING ONLY

The VersionRR Damper System features its inverted mono-tube design where oil and gas are separated within the cylinder.  Unlike twin tube designs the Monotube dissipates heat better, allows for finer dampening adjustments, and requires more expensive design process.  Better rides result because aeration and cavatation are a lot less common in the Monotube design.   

Fine tuning the VersionRR to your ride for your handling and comfort levels is easy; just adjust your dampening until you find the sweet spot.  Pillow ball top mounts in the front and rear allow chamber to be adjusted from the actual coilover and not a separate camber kit.  In addition pillow ball top mounts gives you a more direct feel of solid drive response.   

The VersionRR pillow ball mounts and most pieces of the coilover are made from 6061 billet aluminum with T6 for increased hardness which is lightweight, durable, and resists rust. The shock body is made from steel and is electroplated with zinc to resist rust and the elements.

Key features for the Version RR;  the VersionRR Damper has aggressive valving and spring rates; the VersionRR Damper is for Race applications only; theVersionRR Damper has 36 way adjustable dampening; the VersionRR Damper is made from high quality 6061 Aluminum; the VersionRR Damper is Compression/Rebound adjustable; the VersionRR Damper has Adjustable spring perch for height adjustment.

  • Aggressive Valving and Spring Rate
  • For Race Applications
  • Made from 6-61 Aluminum
  • Compression Rebound Adjustable
  • Adjustable Spring Perch